Portable SDI Tester - Silt Density Index Test Kit direct SDI Whole House Home RO Systems

Home RO Systems

A thinner consistency can be achieved by dispersing in solvents such as xylene

4" x 40" Microfiltration Membrane (MF Membrane) | Polyvinylidene Fluoride (PVDF)

5% For Housing: Standard 4" x 21" Outer Wrap: Tape Wrapped Membrane Type: Tap or Brackish Water Membrane Sheet: TFC (Thin Film Composite) Element Type: Spiral Wound Feed Water Test Temperature: 77°F (25°C) Single Element Recovery: 8% Chlorine Tolerance: 0 Feed water pH Range: 2-11 Can Replace:

which is now obsolete by the manufacturer

Portable SDI Tester - Silt Density Index Test Kit direct SDI Whole House Home RO SystemsDirect SDI Portable Silt Density Index Test Kit (SDI Tester) SDI 2000 Suspended solids and colloidal materials in feed water are one of the biggest problems in reverse osmosis systems. Silt Density Index (SDI) is the established measurement of this fouling problem, in which a 0. 45 micron filter is exposed to the feed water under pressure and filtration rates are calculated. In most cases, an SDI of less than 5 is considered acceptable for the reverse